| CAREERS |
Remtech designs, fabricates, and installs mobile, portable and custom treatment and remediation systems for soil, groundwater, wastewater, stormwater, process waste streams, landfill leachates, and recycling systems that include: oil/water separators, air strippers, biosparge & biovent systems, spill response kits, free-product recovery well pumps. Remtech also offers a variety of spill kits, magnetic drain stops, and an enzyme bioremediation biostimulation accelerator/cleaning agent - HC-2000.
Multi-Phase Extraction Systems
Remtech's custom fabricated mobile Multi-phase High Vacuum Extraction Systems Integrated with HC-2000 Bioremediation produces 25 inches of Hg on a network of dual-phase extraction wells removing free product and vapors from tight soils. Pressure injection of HC-2000 in perimeter wells with simultaneous high vacuum extraction from center wells desorbs free product from soil pores, oxygenates capillary fringe contaminants, and accelerates bioremediation of soil bound contaminants.
Typical Components Include: Rotary Claw Blower, Knock-out Tank, Mist Eliminator, Oil Water Separator, Dissolved Air Floatation with Calcium Chloride Flocculation, Sand Filtration, Multi-media Filtration, Bag Filtration & Granular Carbon Filtration.
Available with or without coalescing media. Compatible with Remtech Air Strippers for gravity flow between reactors. Easy access for cleaning. Optional auto skimmer for free product removal. Flowrates from 15 to 100 gpm+.
Low-Profile Diffused Air Strippers - Economical low-maintenance alternative for efficient removal of volatile organic compounds. Remtech's models include the Bubble Lance and LPAS which are available in polyethylene, PVC, steel, and stainless steel. Flowrates from 15 to 100 gpm+. Flow through single or multiple chambers with no small plates or tray orifices to clog. Mobile System also available.
Stripping Towers - Manufactured from PVC or Stainless Steel where a minimum footprint is required. Standard tower height 20 feet with diameters ranging from 10 to 24 inches. Various size Jaeger Tripak media. Flowrates ranging from 20 to 100 gpm+.
Low Pressure BioVent System - regenerative blowers available in sizes ranging from 1 to 10 Hp. Flowrates range from 90 to 350 cfm and 45 to 80 inches (water) vacuum. Demisters with high efficiency filters come in 55 & 85 gallon modules. Mobile Systems also available.
Medium Pressure BioVent System - Rotary Lobe Blowers (up to 15 psi). High Pressure Pumps - Liquid Ring Pumps (up to 30 inches of mercury) for vapor or total liquids and vapor extraction.
BioSparge System - Remtech offers both lubricated (high efficiency filtration) and non-lubricated compressors with a large variety of sparge injection tips depending on your application.
Free Product Recovery Well Pumps
Model 1.0 Slurp - diaphragm pump fits in 2 ft x 2 ft vault to provide total fluids drawdown and free product removal at suction lifts less than 20 feet and flowrates up to 30 gpm.
Custom/Mobile Treatment Systems
Available upon request.
Contact Remtech for additional information & pricing on our remediation systems. Indicate pricing and availability on the item you are interested in on eform below and we will get back to you shortly.
Remtech Oilless BioSparge Blower
Remtech BioVent Trailer Built for State UST Trust Fund
Remtech Mobile Two-Phase Vacuum Extraction System
Mobile Air Stripping, Oil/Water Separator & Carbon Filtration System
Model 1.0 Recovery Well Pump
REMTECH ENVIRONMENTAL REMEDIATION EQUIPMENT
VACUUM TRUCK SERVICES
HEALTH & SAFETY TRAINING
FEATURED PROJECTS & DOWNLOADS
200 Cobb Parkway North
Marietta, Georgia 30062
Phone: 770-427-7766 or 800-377-3648 Fax: 770-427-7001
Copyright Remtech Engineers, 2019