Remtech^TM Slant Rib Coalescing Oil/Water Separator

Remtech's SRCO is used to remove oil from low flow wastewater when minimal solids are present. This unit produces effluents with 10 mg/l or less of non-emulsified oil. Inlet and outlet piping is constructed of PVC; the separator shell is made of FRP, and the slant rib coalescing media is constructed on PVC. This separator is rated at flow rates up to 35 gpm.   Specifications: Hydraulic Operating Range = 24 - 35 gpm Dimensions: 39 inches W x 58 inches L x 34 inches H Media Spacing = 1/4" Maximum Temperature = 140 deg F Coalescing Area = 1,632 sf Weight Empty = 260 lbs Inlet/Outlet = 3 inches Drain = 3/4 inches

Remtech Engineers^TM

Web Inquiries: Extension 204
Fax: 770-427-7001
Email: postmaster@remtech-eng.com
©    Copyright Remtech Engineers, 1998
TM  Remtech is a registered trademark. All rights reserved